CME-45B Truck Mounted Drill

Optional Equipment

Our 140 pound [63.5 kg] automatic hammer gives you extremely consistent and accurate Standard Penetration Test results, meeting all ASTM-D-1586-99 requirements. There are no ropes or cables to impede the free fall of the weight. A Viewing slot allows you to verify the 30 inch [76cm] fall height.

The hammer swings from stored position to on-hole position, and the 5 foot [1.5m] vertical travel also allows you to use the hammer to drive casing or probes. Since raising and lowering is done hydraulically, set up is quick and almost effortless.

To improve safety, all moving parts are enclosed, including the impact area between the weight and the anvil.

Above deck auger and rod racks are provided with the optional drill platform.

Several tool box, auger and rod storage configurations are available.

Slide bases make the job easier and quicker.

Slide base options are available in both in-out and sideways movement of the drill on the platform.

A 15 inch [38.1 cm] in-out movement allows you to quickly move the drill on and off the borehole and align the sheaves for lifting tools with the cathead or any of the hoists.

A 8 inch [12.7 cm] sideways movement gives you even more versatility. Aligning augers or rods when making connections is easy. If the bit drifts off at an angle when you start a hole, you can quickly straighten it to a vertical position.

If you have ever tried to line up your rig on an existing bore hole, you've probably already recognized another benefit of the slide base.

Additional optional equipment
• Drill platform
• Trailer
• Vertical drop hammer rack
• Electric actuated throttle
• Rod holder
• Break-out wrench
• Front winch
• Hydraulic leveling jacks
• Continuous sample tube system
• Pavement coring attachment
• Mast (from base to sheaves)
• 15 foot [4.6m]
• 18 foot [5.5m]
• 20 foot [6m]
• Cathead, 8 inch [20.3 cm] diameter
• Hydraulic hoist
• 1,800 pound [816 kg]
• 3,200 pound [1,452 kg]
• 5,000 pound [2,268 kg]
• Hydraulic wireline hoist
• 900 pound [408 kg], max line speed 400 feet [122m] per minute
• Water tank
• Capacity based on space and vehicle GVW. Also available with rod storage underneath and rack on top.
• Water pumps
• Progressive cavity
• 36 gpm/150 psi [136 lpm/1,034 kPa]
• 36 gpm/225 psi [136 lpm/1,551 kPa]
• Triplex piston
• 20 gpm/600 psi [70 lpm/4,137 kPa]
• Other pumps available