CME-55DD Directional Drill

Specifications

Engine

• John Deere 6068T turbocharged diesel engine rated at 185 hp
• 39 gallon fuel tank

• Dual range thrust and pullback
  • Low range mode:
    Force: 50,250 pounds (max)
    Speed: 55 feet per minute (max)
  • High range mode:
    Force: 25,125 pounds (max)
    Speed: 110 feet per minute (max)
• Drilling angle: 0 to 22 degrees

• Dual range rotation system:
  • Low range mode: 9,100 foot pounds torque, 75 rpm (max)
  • High range mode: 4,550 foot pounds torque, 150 rpm (max)

• 6 inch [15.2 cm]; opposing cylinders, open top with quick change jaws

• Length: 10 feet
• Outside diameter: up to 3 1/2 inch

• FMC Triplex pump, dual speed with infinite control
  • max fluid pressure: 1,500 psi
    max fluid flow rate: 75 gpm
• 60 gallon on-board fresh water storage

• Primary hydraulic front anchor system with eight 2' augers
• Secondary 80 lb. hydraulic hammer with four drive-in style anchors

• Rubber tracks, steel core reinforced with embedded metal grousers
• Individual hydraulic planetary drives
• Walking beam suspension with heavy duty, maintenance free, sealed idler wheels
• Automatic track tensioning system

• 400 - 3,200 lb. lifting capacity (depending on boom extension)
  Double extension boom
• Cable pendant control with manual override
• Pressure sensitive lockout based on boom position

• Zap alert system
• Zap alert tester
• 4' by 10' grounding mat with cable
• Emergency shut down switches at operator's console, stake down control station and crane control station

Additional standard equipment

• Rod clamp for crane
• Rod wiper
• Umbrella with stand
• Pressure washer wand with hose
• Spare jaw teeth for vise
• Spare saver sub

• 20,200 lbs (approx.)