CME-800 HDH Carrier Specifications

• QSB5.9 turbocharged and charge air cool 5.9 liter Cummins 6 cylinder diesel rated 185hp [138 kW] @ 2500 rpm with 575 ft-lbs [782 Nm] torque @ 1500 rpm.

• Each track is independently driven via a hydrostatic transmission with high pressure variable displacement pump, two speed fixed displacement piston motor and joystick steering operation.

• Twin walking beams with 28 inch [71 cm] diameter smooth tread solid rubber tires and oil filled hubs with dual cone seals.

• 33 inch [84 cm] wide, 4-ply rubber belt with steel grouser bars.

• Service brake controlled closed circuit hydrostatic transmission levers. External spring applied hydraulic release parking brake.

• 100% hydraulic power via single control lever for each track.

• Complete set of engine monitoring gauges, keyed ignition switch, starter button, headlight switch, emergency stop switch, steering controls with engine throttle switches, parking brake control, two speed track control, front carrier winch control and track drive pressure gauges.

• 40 U.S. gallons [152 L]

• 80 U.S. gallons [303 L]

• Supplied with fixed displacement pump with max capacity of 25 gpm @ 2000 psi
  (Contact CME for additional auxiliary hydraulic horsepower availability.)

• 15,00o pound (6,810 kg)

• Inside turning radius: 0 ft.
• Ground speeds (max):
  • Low range: 2 mph [3.2 kph]
  • High range: 8 mph [12.9 kph]
• Tractive effort (max):
  • Low range: 45,854 pounds [20,814 kg]
  • High range: 10,690 pounds [4,853 kg]
• Ground clearance: 13.5 inches [34 cm]
• Gradeability:
  • 60% straight ahead
  • 40% side hill

• Empty weight: 16,800 pounds [7,627 kg]
• Payload: 16,000 pounds [7,264 kg]
• Ground bearing pressure (EVW): 1.89 psi [.133 kg/sq cm]
• Ground bearing pressure (GVW): 3.7 psi [.260 kg/sq cm]